1000 Litre Vertical Expansion Vessel

NS010894

7.7 Bar Design Pressure

900mm Diameter with 1290mm Shell

Built to LLOYDS CLASS 3 from P265GH

0°C to 95°C and 0.75mm Corrosion Allowance

inspection by Lloyds Register with To Code

PED Category N/A modules N/A

Group 2 Gases

1 X Replaceable Rubber Bladder(s)

Suitable for cold potable water (50% acceptance level)

1 X Relief Valve

1/2″ BSPT 3000lb Modified Screwed end cap c/w mf elbow

1 X Pressure Gauge

1/2″ BSPT 3000lb Modified Screwed end cap c/w mf elbow

1 X Drain Connection

1/2″ BSPT 3000lb Modified Screwed end cap c/w plug

3 X Supports

80x80x10mm Angle legs Support c/w 6 thick backing plates

1 X Main inlet

St/st 1″ BSPT 3000lb Screwed

1 X Air Connection

1/8″ BSPT 3000lb Modified Screwed end cap

1 X Bottom connection

150NB BS4504 or EN1092 Flanged Pad c/w st/st blank assy

1 X Top Connection

90 O/Dia special pad

2 X Lifters

No.2 Lifters c/w 6 thick backing plates

Gritblasted SA 2.5 followed by one coat 2 pack epoxy primer

Drawing Number 8970 Rev 2