SST Process Engineering Heat Exchangers from Abbotts

SST Process Engineering in  Grantham  – For over a year we have been working with the staff of SST Process Engineering with more than 70 years combined experience of making Heat Exchangers.
Since then we have made a cracking job of a variety of Shell and Tube heat exchangers, Tube Bundle replacements, and heat exchanger repairs and testing.
Having built boilers and pressure vessels since 1870, we remain a well established family owned and run business, with ISO9001 in place for years, 36 staff,  in-house design capability,  40,000 square feet of factory and lifting capability of 20 tonnes, we believe absorbing the know how and history of SST Process Engineering gives us great strength and stability enabling us to provide you with the expertise and craftsmanship that you require for Heat exchangers.

Please ring or email us now with your enquiries –  Tel: 01636 704208 for SST Process Engineering enquiries

SST Process Engineering Heat exchanger pressure vessel


Abbott vertical or horizontal Shell and Tube heat exchangers, finned tube Heat Exchangers, fin-fan Heat Exchangers, primary/secondary condensers, kettles, vaporisers, economisers, chillers, falling film evaporators – constructed from carbon steel, stainless steel SS316, SS304, Duplex and high alloy steels. Used in applications for petrochemical, chemical, general process and commercial industries. Abbott Heat Exchangers are 3rd party approved – CE marked and fully certificated to mechanical standards including TEMA-R, TEMA-C and TEMA – B.

Mostly PD5500 Cat, I, II & III , also ASME(VIII) – NCS. CE marked (where applicable) and PED (2014/68/EU) compliant. TEMA-R, TEMA-C and TEMA-B mechanical standards. In house quality control and procedures to BS EN ISO 9001:2008, third party survey and inspection by Lloyds Register or your nominated third-party – Nigel from SST Process Engineering Grantham 01476 590112 was

If you’ve got this far …  I suggest you don’t pay too much attention to the bit below  as to be quite honest it is mostly a load of blurb to help this page be found on google.

(perhaps google will know now I have written that – how clever is it ??)

Heat exchangers are used to transfer heat between a  fluid and a solid or a few fluids. Liquids or fluids will be kept apart by a solid wall – like stainless steel  to stop mixing they may even contact directly

They are employed in space heating and ventilation,  refrigeration, air conditioning systems on large building.

Shell and Tube heat exchangers, finned tube Heat Exchangers, fin-fan Heat Exchangers, primary/secondary condensers, kettles, vaporisers, economisers, chillers built with Stainless steel, Duplex or Carbon Steel: ASTM A240 316L, P265GH (BS1501-151-430A). 100% PMI of all stainless steel materials at goods receipt. All material is Western European or USA source.

Working Pressure:
To suit your system design.

Shell, bonnet, tubesheet, tubes, U-tubes, baffles, supports, tie-rods, impingement plates, inlet connections, outlet connections, deflector plates, brackets can all be built and positioned as best to suit your heat exchanger application and requirements. Supplied with gaskets, fasteners and stainless steel nameplate.

Stainless steel – inside natural. Outside – surfaces cleaned with welds de-scaled.
Carbon steel – we can meet the demands of many paint specifications with our in house blasting to SA2.5 and painting, specialist finishes are subcontracted to a number of tried and tested painting contractors.

For producta as made by SST Process Engineering,  Grantham  01476 590112, please contact by ringing 01636 704208 and ask for Sales.




0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply