800 Litre Vertical Surge Vessel

NS011084

7.7 Bar Design Pressure

1067mm Diameter with 600mm Shell

Built to PD5500 – 2012 – CAT 2 from P265GH or BS1501-151/161-430 A/B

0°C to 60°C and 1mm Corrosion Allowance

inspection by Lloyds Register with 10%UT

PED Category CAT 4 modules G

Group 2 Gases

1 X Inspection Opening(s)

24″ ANSI B16.5 CL150 Flanged Branch With Cover

4 X Supports

100x100x10mm Angle legs Support

1 X Inlet/Outlet Connection(s)

200NB BS4504 or EN1092 PN16 Flanged Branch

1 X Air Inlet Connection(s)

1″ BSPT 3000lb Screwed st/st. c/w 1/8″BSPT st/st red to 1/2″BSP

1 X Air Relief Connection(s)

1″ BSPT 3000lb Screwed st/st. c/w 1/2″BSPT st/st red to 1/2″BSP

1 X Drain Connection(s)

50NB BS4504 or EN1092 PN16 Flanged Branch

1 X Pressure Gauge Connection

1″ BSPT 3000lb Screwed st/st. c/w 1/2″BSPT st/st red to 1/2″BSP

1 X Backwash

50NB BS4504 or EN1092 PN16 Flanged Branch (c/w int drilled plate)

2 X Level gauge

50NB BS4504 or EN1092 PN16 Flanged Branch (1 c/w drilled int plate)

2 X Side Lifters

No.4 Side lifters and backing plates

1 X Top Lifter

No.2 Top lifter

Gritblasted to SA 2.5 followed by a 2 pack epoxy paint system

Drawing Number 8971 rev 1